Cooling Shroud Kit for a LSI 9300-16i

The LSI 9300-16i HBA is a wonderful choice for DIY NAS enthusiasts, but outside of a data center with frigid climate control and numerous fans pushing air over the LSI 9300-16i's heatsink, it tends to get hot.

When using this HBA in a homelab environment, additional cooling for this HBA is recommended!This fully-assembled kit provides the airflow needed to keep the LSI 9300-16i operating well in your homelab.

What's included in the kit:

1. 3D-printed LSI 9300-16i Fan Cooling Shroud
2. Hangdahui HD9215H12B 92x92x15mm PWM fan (2800 RPM / 44.4 CFM)
3. 4 x Cooling Fan Screws

If you have a 3D-printer, you can find this model on Printables:

1. https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud

Please note that:

1. The LSI 9300-16i in the photos is for demonstration purposes only and is not part of this listing.